TroubleshootingInformationHDMI Control FunctionPlaybackSetupGetting Started SpecificationsENGLISHCopyright protection systemIn order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection,both the player and TV or the AV Amp need to support the copyright protection system known asHDCP(High-bandwidth Digital Content Protection System). HDCP is copyright protection technologycomprised of data encryption and authentication of the connected AV device. The DBP-4010UDsupports HDCP.NOTEIf a device that does not support HDCP is connected, video and audio are not output correctly. Read theowner’s manual of your television or AV Amp for more information.The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) maybe limited by the HDMI audio specifications of the connected device regarding permissible inputs. Forexample, if the HDMI audio specification of the connected device is 5.1 channels, 5.1-channel audio willbe automatically output even when playing back 7.1 channels by the DBP-4010UD. In this case, analogaudio output will also be 5.1-channel.Audio signal input may not be supported depending on the HDMI compatible monitor (projector, etc.)being used.When the DBP-4010UD is connected to this kind of device, audio signals are not output from the HDMIterminal.•••1. Home Theater Playback – Playing Back Using Multi-channel System –Connection to an AV Amp with No HDMI Audio InputWhen playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the DBP-4010UD outputs Dolby Digital or DTS bitstream from its digital audio output terminal."6%*0$0"9*"-*/*/015*$"-AV AmpNOTEDolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output withthis connection.When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, doso with an HDMI connection (vpage 13, “Using an HDMI Cable to Connectto an AV Amp or Television”).Super Audio CD’s DSD signal cannot be output. Also, during CD layerplayback, 44.1 kHz/16-bit Linear PCM is output.••Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVDdisc with recorded DTS content can generate noise and even damage your speakers.When connecting with an optical transmission cable (sold separately), make sure the plug shapealigns with the socket, and insert fully.••Match theshapesConnections