Denon DN S5000 - DJ Table Top Single CD Player Operating Instructions Manual

Contents

9ENGLISH#6 aa (Alpha) PITCH BEND – button#7 aa (Alpha) PITCH BEND + button• Pushing these buttons will change Alpha-Trackplaying speed temporary.• While pushing a (Alpha) PITCH BEND + buttonplaying speed increases and speed decreaseswhile pushing a (Alpha) PITCH BEND – button.• When release button, playing speed returns tothe previous speed.• aa (Alpha) CUE-CLR:If the a (Alpha) CUE button is pushed whilepushing the a (Alpha) PITCH BEND – button,the Alpha-Cue point is cleared.#8 TAP, LOCK, AUTO/INPUT BPMbutton• TAP:When you push this button repeatedly, theAuto mode turns off and starts measuring yourBeats Per Minute (BPM) by tapping.• LOCK:When this button is pressed once while theauto BPM counter is operating, the datameasured by the auto BPM counter is locked.• AUTO:When pushing the TAP button for 1 second,activates AUTO BPM mode.The measured BPM is displayed in thecharacter section of the display.• INPUT BPM :When the TAP button is pressed and held in formore than 2 seconds, the BPM input mode isset and the BPM value can be input directlywith the PARAMETERS knob. When the buttonis pressed again, the BPM input mode is turnedoff.NOTE:If you select a new track, AUTO BPM mode turnson automatically.#9 PITCH BEND – button$0 PITCH BEND + button• Pushing these buttons will change mainplaying speed temporary.• While pushing PITCH BEND + button playingspeed increases and speed decreases whilepushing PITCH BEND – button.• When release button, playing speed returns tothe previous speed.@7 DISPLAY MAIN/aa (Alpha), TITLEbutton• DISPLAY MAIN/aa (Alpha):A quick push will display changes betweenMAIN display and a TRACK display.• TITLE:When there is CD text data, the CD text datais displayed when the button is pressed formore than 1 second.The display returns to normal after the CD textdata is displayed.@8 CONT./SINGLE, RELAY button• CONT./SINGLE:Short pushing play ending mode betweenCONT (continue: play more tracks) andSINGLE (stop playing at current track played).• RELAY:You can turn on and off RELAY PLAY mode.Relay playback is possible when two DN-S5000s are connected by X-EFFECT.@9 TIME, T.TIME button• TIME:A quick push will display mode changesbetween ELAPSED TIME and REMAIN TIME.• T.TIME:A long push, will display mode changesbetween TRACK TIME and DISC TIME.• So, you can select display mode from fourmodes, TRACK ELAPSED, TRACK REMAIN,DISC ELAPSED and DISC REMAIN.#0 MEMO, PRESET(/ PROGRAM/RANDOM) button• MEMO:The memo mode starts when this button ispushed once in the Cue mode.• PRESET:When this button is pushed for more than 1sec, the PRESET mode starts.• PROGRAM:When the Preset mode is selected, with ashort push, you can make list of program playand turn on/off Program play mode usingPARAMETERS knob.• RANDOM:When the Program mode is selected, with ashort push, Random play mode can be turnedon/off with PARAMETERS knob.#1 FAST SEARCH knob (6 7)• Fast-forward playback is selected whenmoved to the 7 side, fast-reverse playbackis selected when moved to the 6 side.#2 aa (Alpha) MODE, MIRROR MIXbutton• aa (Alpha) MODE:Use this to turn the Alpha-Mode on and off.The Alpha-Mode playback sound is outputtedfrom the ALPHA OUT jacks in the Alpha-Mode.• MIRROR MIX:The Mirror Mix mode is selected when thisbutton is pressed and held in for more than 1second.When the button is pressed and heldin for more than 1 second, the Mirror Mixmode is turned off.In the Mirror Mix mode, the Alpha-Track isplayed with a delay of the specified beat ortime after the Main Track.#3 aa (Alpha) CUE/SAMP. STOP button• aa (Alpha) CUE:Use this as CUE and STUTTER button inAlpha-Track.This button lights up when the Alpha-CUEpoint is set.• SAMP. STOP:Push while Sampler playback, Samplerplayback stops.#4 TRACK/PARAMETERS knob• TRACK:When PARAMETERS LED is on, turn this knobto select tracks.By pushing this knob down while turning, thetracks will change 10 at a time.• PARAMETERS:When the PARAMETER LED is flashing, turnthis knob to select and change the parameterfor items found in the Platter effects, Program,Memo, and Preset data, etc.#5 aa (Alpha) track Play/Pause button(13)• When this button is pushed while in the Cueor Pause mode, the Alpha-Track playbackstarts. By pushing it once again will Pause theAlpha-Track.• It is necessary to make Cue point for theAlpha-Track before starting Alpha-Trackplayback.$1 Pitch Slider• Use this slider to adjust playing speed.• The playing speed decreases when slideupwards and increases downwards.$2 PITCH/KEY, RANGE button• With this button you can select PITCH andKEY ADJUST mode. Mode changes Pitch on,Key Adjust on and both off cyclically. PITCHLED indicates in Pitch mode and KEY ADJUSTindicator lights up in Key Adjust mode.• RANGE:Push this button for more than 1 sec to selectthe pitch range.$3 DUMP/RVS, SOURCE button• DUMP/RVS:Push this button a short time to select theeffect function from RVS and DUMP.• SOURCE:When this button is pressed and held in formore than 1 second, the source for which thePlatter effect function is to be used (Main,Alpha-Track or Main and Alpha-Track) can beselected with the PARAMETERS knob.$4 BRAKE/ECHO, TIME button• BRAKE/ECHO:Push this button a short time to select theeffect function from BRAKE and ECHO.• TIME:If pushed for more than 1 sec, you can selecttime for BRAKE or ECHO with PARAMETERS.$5 DRAG-S, TIME button• DRAG-S:Push this button a short time to set the DRAG-S.• TIME:If pushed for more than 1 sec, you can selecttime for DRAG-S with PARAMETERS.