7ENGLISH2 CONNECTIONS/INSTALLATION1. Turn off the POWER switch.2. Connect the RCA pin cords between the DN-S5000 outputs and inputs of your mixer. Be sure MAIN OUTs areMain outputs and ALPHA OUTs are outputs of Alpha-Track sound.3. If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks tothe mixer using 3.5 mm stereo mini cord.4. If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplersand Brake from the crossfader to get wide variety of operation. You may also trigger the Alpha Track byconnecting Fader Start 1, 2 to the DN-X800 mixer using the 3.5 mm stereo mini cords.CH1 CH2 CH3 CH4FADERch1FADERch2DN-X400MAIN ALPHAFADERMAINFADERALPHADN-S5000X'EFFECTINX'EFFECTOUT3.5 mm stereo mini cordCH1 CH2 CH3 CH4FADERch3FADERch4 X'EFFECTDN-X800MAIN ALPHAFADERMAINFADERALPHADN-S5000X'EFFECTINX'EFFECTOUTRCA cordFig. 1 : Fader start connections example 1 Fig. 2 : X-Effect connections example 13 PART NAMES AND FUNCTIONS(1) Front panelq Disc loading slot• Load the CD. Load the disc slowly, and releaseit once the DN-S5000 starts drawing the discin.w CD drive• This Drive is field replaceable by you.• Optional spare drive is sold separately.CAUTIONS:• Do not load discs when the power is turnedoff.• Do not try to forcibly remove a disc oncethe DN-S5000 has started to draw it in.• Do not load more than once disc at a timeor insert anything other than discs.Otherwise loading mechanism may bedamaged.e POWER button (¢ON £OFF)• Push this button to turn power on and off.r X-EFFECT jacks(X-EFFECT IN/OUT)• Connect this jack to the DENON mixer DN-X800 and DN-S5000 with 3.5 mm stereo minicord.t Alpha analog output jacks(LINE OUT ALPHA)• These are unbalanced RCA output jacks.• Alpha-Track audio signals are output.y Main analog output jacks(LINE OUT MAIN)• These are unbalanced RCA output jacks.• Main audio signals outputs.u Fader start jacks(FADER MAIN, ALPHA)• Use these when your mixer has Fader Startfunction with 3.5 mm stereo mini cord.i Digital output jacks(DIGITAL OUT MAIN, ALPHA)• Main/Alpha Digital data is output from thesejacks.• Use 75 Ω/ohms pin cord for connections.• We recommend you use braided wire typeshielded cables.(2) Rear panelCAUTION:• Do not turn off the power while a disc isloading or being ejected. Otherwise loadingmechanism may be damaged.Fig. 1 : Fader start connections example 2• Fader start playback is possible with the Main andAlpha-Tracks.Fig. 2 : X-Effect connections example 2• X-EFFECT playback is possible with the Main andAlpha-Tracks.CH1 CH2 CH3 CH4FADERch1FADERch2DN-X400MAIN ALPHAFADERMAINFADERALPHADN-S5000CD1X'EFFECTINX'EFFECTOUTMAIN ALPHAFADERMAINFADERALPHADN-S5000CD2X'EFFECTINX'EFFECTOUTCH1 CH2 CH3 CH4FADERch3FADERch4 X'EFFECTDN-X800MAIN ALPHAFADERMAINFADERALPHADN-S5000CD1X'EFFECTINX'EFFECTOUTMAIN ALPHAFADERMAINFADERALPHADN-S5000CD2X'EFFECTINX'EFFECTOUT• Fader start playback is possible with the CD 1 MainTrack and CD 2 Main Track.• The memos of CD1 and CD2 can be comparedwhen the CD players are connected by X-EFFECT.• Relay play• X-EFFECT playback is possible with the CD 1 MainTrack and CD 2 Main Track.• The memos of CD1 and CD2 can be comparedwhen the CD players are connected by X-EFFECT.• Fader start playback is possible with the Alpha-Tracks of CD1 and CD2.• Relay play