Denon DN S5000 - DJ Table Top Single CD Player Operating Instructions Manual

Contents

17ENGLISHqt ew, r, t1Splice point setting modeq Push the SPLICE buttonfor more than 1 sec toenable setting Splice pointusing A1, A2 and Bbuttons.• The A button illumination flashes whenthe Splice mode is set.• The Splice point setting cannot be set forthe A point at which Hot Start data isalready loaded.A / B TRIMSPLICESplice2Set splice start point Aw After starting playback, pushthe A1 or A2 button. Thecorresponding A buttonlights up and that point is setas splice start point A, and BLED start flashing.3Set splice end point Be After setting splice startpoint A, push the B button.The B LED lights up and thatpoint is set as splice endpoint B.5Temporarily turning off the splice playbackr When the corresponding Abutton is pushed aftersetting splice points A and B,the A button illuminationturns off and the Splice playmode is temporarily turnedoff.• Push the corresponding A button againto resume splice playback.• Use this function to skip a section between A and B points. The A point is the point from which jumping starts,the B point the point at which jumping ends.• The A1 and A2 Hot Starts and Stutter functions cannot be used if both Splice points are set in the Splice mode.4Start splice playbackStart playback from any point before point A.When point A is reached, the section frompoint A to point B is jumped seamlessly andplayback continues.6Clearing the splice pointst While pressing the FLIP/(CLR) button, pushthe corresponding A button to clear splicepoints A and B.• When the splice points are cleared, theA button is set back to the Hot Startmode.