Denon DVM-2845CI Operating Instructions Manual

Denon DVM-2845CI Operating Instructions Manual Manual pdf 18 page image

– 18 – ENGetting started• Turn on the power of the TV, amplifier and any other com-ponents which are connected to the DVD player.• Make sure the TV and audio receiver (commercially avail-able) are set to the correct channel.Press the POWER ON button.• “P-ON” will appear briefly on the display panel.Press the OPEN/CLOSE button to open disc load-ing tray.Press the DISC SKIP button repeatedly or pressthe DISC NUMBER button.• The desired disc tray moves to the front position.Place the disc in the tray,with the label facing up.• Repeat steps 3 and 4 toload more discs.Press the PLAY button.• The tray will close automatically, and playback will startfrom the first chapter or track of the disc. If the playbackdoes not start automatically, press the PLAY button.• If the disc has not been set on the left side tray, theDVD player will play the disc which is set on the rightside tray.• When you want to select the other disc, press the DISCSKIP button repeatedly or the DISC NUMBER buttonfor your desired disc.• When you playback the DVD with a title menu, it mayappear on the screen. In this case, refer to “TitleMenu”.Press the STOP button to stop playback.NOTES:• A “prohibited icon” may appear at thetop-right on the TV screen during oper-ation, warning that a prohibited opera-tion has been encountered by the DVD player or thedisc.• With DVDs that use some titles for playback programsignals, playback may start from the second title, or itmay skip these titles.• During the playback of two layered disc, pictures maystop for a moment. This happens when the 1st layerswitches to the 2nd layer. This is not a malfunction.• During the playback of a DVD-RW which has beenrecorded in the VR mode, the sound or picture mayfreeze momentarily depended on disc content.• You can open the tray and change 2 discs during play-back by pressing the DISC EXCHANGE button.• Disc position will be displayed on the TV screen whenyou press DISC NUMBER or DISC SKIP button.654321DivX®WMAJPEGMP3SuperAudio CDCDVCDDVD-ADVD-VPress the MENU button.• The DVD main menu will appear.If the feature is not available, symbol mayappear on the TV screen.If disc menu is available on the disc, audio lan-guage, subtitle options, chapters for the title andother options will appear for selection.Press the Cursor buttons (K / L/ s / B) to select anitem, and the ENTER button to confirm the selection.4321DVD-VDISC PLAYBACKBasic PlaybackDisc MenusDVD may contain menus to navigate the disc and access spe-cial features. Press the appropriate Numeric buttons or use theCursor buttons (K / L / s / B) to highlight your selection in theDVD main menu and press the ENTER button to confirm.NOTE:• Unless otherwise stated, all operations described in thismanual are based on remote control use. Some operationscan be carried out using the menu bar on the TV screen.DVD-ADVD-VGeneral FeaturesHDMI SetupPress the HDMI button on the front panel to selectthe HDMI output mode.The output mode changes as follows every timethe HDMI button is pressed.• The HDMI indicator on the front panel lights up whenHDMI output mode is on.480P (Default): Video output from the HDMI OUT jack at 480p.720P: Video output from the HDMI OUT jack at 720p.1080: Video output from the HDMI OUT jack at 1080i.1080P: Video output from the HDMI OUT jack at 1080p.OFF: No video outp ut from the HDMI OUT connector.11080 1080P OFF480P 720PLeft side trayRight side trayNOTES:• Video and audio signals may distorted temporarilywhen switching to/from the HDMI output mode.• Use a display equipment with an HDMI-compatible port.• The HDMI indicator on the front panel flashes when youselect the HDMI output mode but there is no HDMI cable.• You can check the HDMI connection status by pressingthe DISPLAY button during playback with the HDMIoutput mode (refer to page 26).• If the TV is not compatible with newly selected HDMIoutput mode, the actual output mode will be kept theone before changing the selection. When this occurs,the newly selected mode will appear on the front paneldisplay (see page 12) while the actual output resolutionwill be indicated by performing the on-screen display asdescribed on page 27.Insert a Video CD.Press the STOP button.Press the Numeric buttons to enter the desiredTrack number.• PBC function is now canceled and the playback of theVideo CD will start.To call back PBC function, press the STOP buttontwice, and then press the PLAY button.• The title menu will appear on the TV screen.4321VCDCANCELING AND CALLING BACK PBC FUNCTION