– 3 – ENEnglishPRECAUTIONSThis unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possibleeye injury.CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECI-FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTOBEAM.LOCATION: INSIDE, NEAR THE DECK MECHANISM.Laser SafetyRADIO-TV INTERFERENCEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:1) Reorient or relocate the receiving antenna.2) Increase the separation between the equipment and receiver.3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.4) Consult the dealer or an experienced radio/TV technician for help.This Class B digital apparatus complies with Canadian ICES-003.FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications tothis equipment may cause harmful interference unless the modifications are expressly approved in the man-ual. The user could lose the authority to operate this equipment if an unauthorized change or modificationis made.CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.Non-use periods - Turn off the unit when it is not in use. Unplug the unit from the household AC outlet if it isnot to be used for a long time. Unplug the unit during lightning storms.Please read this operating instructions carefully before using your DVD player, and keep it for future reference.ImportantThe main power supply is engaged when the main plug isplugged in a 120V, 60Hz AC outlet. To operate the unit, pressthe ON/STANDBY button to turn on the unit.Power SupplyUse only discs marked with logos listed on page 6.To avoid fire or electric shock, do not expose this unit to rainor moisture.WARNING:LIVE PARTS INSIDE.DO NOT REMOVE ANY SCREWS.WarningInstallation LocationFor safety and optimum performance of this unit:• Do not stand the unit up vertically. Install the unit in a hori-zontal and stable position. Do not place anything directly ontop of the unit. Do not place the unit directly on top of the TV.• Shield it from direct sunlight and keep it away from sources ofintense heat. Avoid dusty or humid places. Avoid places withinsufficient ventilation for proper heat dissipation. Do notblock the ventilation holes on the sides of the unit. Avoid loca-tions subject to strong vibration or strong magnetic fields.• Be sure to remove a disc and unplug the AC power cordfrom the outlet before carrying the unit.Cautions on InstallationNoise or disturbance of the picture may be generated if thisunit or any other electronic equipment using microprocessorsis used near a tuner or TV.If this happens, take the following steps:• Install this unit as far as possible from the tuner or TV.• Set the antenna wires from the tuner or TV away from thisunit’s power cord and input/output connection cords.• Noise or disturbance tends to occur particularly when usingindoor antennas or 300Ω/ohms feeder wires. We recommendusing outdoor antennas and 75Ω/ohms coaxial cables.NOTE:• For heat dispersal, do not install this equipment in a con-fined space such as a book case or similar unit.Wall10 cm or more1 24 53DISC