Power managementPower modeso Quick Start ModeTo save power, the device will automatically enter “Quick Start Mode”whenever there is no network access or playback for 20 minutes andwill automatically resume to full power whenever the device is selectedand playing music.The status LED dims when the mode is switched to Quick Start Mode.0 Press the Power button on the remote control unit to switch to Quick StartMode.o Deep StandbyThe device also has the ability to automatically enter “Deep Standby”whenever the wired and wireless network connections are removed formore than 60 minutes in Quick Start Mode. Status LED will turn offduring Deep Standby.To “wake” a HEOS device from Deep Standby, you must press thepower button on the remote control unit which will immediately turn onstatus LED.The Device may need to "find" the network before it can operateproperly.NOTE0 Please note that the HEOS cannot be operated as intended when in DeepStandby as there is no network connection.0 Press and hold the Power button on the remote control unit for more than 3seconds to switch to Deep Standby.o OffTo completely turn off the power to the device you must remove themains plug from the power outlet.Contents Setup Use Troubleshooting Status LED Appendix61
