Resetting your HEOS deviceSolution Refer to Page0 Resetting your HEOS device will clear out the wireless network info, EQ, and name but retain it’s current software. You will haveto use Settings - Add Device to reconnect the HEOS device to your home network before it can be used.To reset your HEOS device, press and hold the Connect and Bluetooth buttons located on the back of the HEOS device for 5seconds until the front LED begins to flash amber.–Restoring the HEOS device to factory defaultsSolution Refer to Page0 Restoring the HEOS device to its factory defaults will clear all of the settings and restore the original software which wasinstalled at the factory.Caution0 All settings will be erased and the software will likely be downgraded!To restore your HEOS device to the factory defaults, unplug the power cable from the power outlet. Press and hold the Bluetoothbutton located on the back of the HEOS device, reconnect the power cable, and hold it in until the front LED begins to flashamber.–* For further information, please visit http://www.HEOSbyDenon.comContents Setup Use Troubleshooting Status LED Appendix66
