Denon avr-2106 Operating Instructions Manual

Also see for AVR-2106: Operating instructions Control protocol Operating instructions Brochure & specs Operating instructions

ENGLISHENGLISHConnecting Other Sources Connecting Other Sources14Connecting a DVD recorderDVD recorderS VIDEOOUTS VIDEOINRLAUDIO INRLAUDIO OUTVIDEOOUTVIDEOINCOAXIALOUTOPTICALINOPTICALOUTRLRLFFGGARLRLACOMPONENT VIDEO OUTYPBPRHCDD• If you wish to perform analog dubbing from a digital source, such as a DVD recorder to an analogrecorder such as a cassette deck, you will need to connect the analog inputs and outputs asshown below, in addition to the digital audio connections.• The digital inputs and outputs connection is the same as that for a CD (MD) recorder.NOTE:• When recording to a DVD recorder, it is necessary that the type of cable used with theplayback source equipment be the same type that is connected to the AVR-2106 VCR-1 (to 2)OUTPUT terminal.Example: VCR-1 IN → S-Video cable : VCR-1 OUT → S-Video cableVCR-1 IN → Video cable : VCR-1 OUT → Video cableConnecting a VCRVideo deckS VIDEOINRLAUDIO INRLAUDIO OUTVIDEOINS VIDEOOUTVIDEOOUTRLRLFGFGARLRLA• For best picture quality choose the component video connection to your VCR. S-Video andcomposite video outputs are also provided. If you choose to use the component videoconnection, it needs to be assigned. For more information about Component Input Assignment( page 37).• You can connect a second video recorder to the VCR-2 terminals.NOTE:• When recording to VCR, it is necessary that the type of cable used with the playback sourceequipment be the same type that is connected to the AVR-2106 VCR-1 (to 2) OUTPUTterminal.Example: VCR-2 IN → S-Video cable : VCR-2 OUT → S-Video cableVCR-2 IN → Video cable : VCR-2 OUT → Video cableConnecting a tape deckRLAUDIO OUTRLAUDIO INTape deckRLRLAARLRL• If humming noise is generated, move the tape deck further away from the source of such noise.