Denon avr-2106 Operating Instructions Manual

Also see for AVR-2106: Operating instructions Control protocol Operating instructions Brochure & specs Operating instructions

37ENGLISHAdvanced Setup – Part 1 Advanced Setup – Part 1ENGLISHExample:When the name has been changed to “DENON”2 Press the CURSOR DD or HH button to select theinput source whose name you want to change,then press the CURSOR FF or GG button.• The screen switches to the character input screen.3 Press the CURSOR FF or GG button to move thecursor ( 22 ) to the character, number, symbol orpunctuation mark you wish to input, and pressthe CURSOR DD or HH button to select thatcharacter.Up to 5 characters can be input.4 Repeat step 3 to complete input of the inputsource name.The names of the input sources displayed on the front displayand the on-screen display can be changed. The names or brandsof the devices connected to the input sources can be input.Setting the Function Rename1 Press the CURSOR DD or HH button to select“Function Rename” at the “Input Setup” menu,then press the ENTER button.• The “Function Rename” screen appears.Example:When “CD” is selected and the CURSOR FF or GG buttonis pressedA B C D E F G H I J K L M N O P Q R S T U V W X YZ a b c d e f g h i j k l m n o p q r s t u v w x y z0 1 2 3 4 5 6 7 8 9’ ( ) + , – . / : ; < = > ? [ ] (space)If you wish to return the input source to its initial setting,press the CURSOR HH button while the input source ishighlighted.If “Yes” is selected for “Default”, the setting isautomatically reset to the default name.5 Once all the characters have been input, pressthe ENTER button.• The “Function Rename” screen appears.• When the input source is selected, the display is as shownbelow.Use the same procedure to change other input sourcenames as well.6 Press the ENTER button to enter the setting.• The “Input Setup” menu appears.This setting assigns the color difference (component) video inputterminals of the AVR-2106 for the different input sources.Setting the Component In Assign.1 Press the CURSOR DD or HH button to select“Component In Assign.” at the “Input Setup”menu, then press the ENTER button.• The “Component In Assign.” screen appears.2 Press the CURSOR DD or HH button to select thecomponent video input terminal, then press theCURSOR FF or GG button to select the inputsource.Select “OFF” for sources for which the component (Y,P B/CB and P R/CR ) video input is not to be used.When the default, “Yes”, is selected, the settings are resetto the factory defaults.3 Press the ENTER button to enter the setting.• The “Input Setup” menu appears.