- 100 -6.8.4. Profiles menuThe Profiles tab menu is used to set up the wireless network security.The profile connected is shown as an active profile on the Status sectionin the information tab page.The BHT attempts to reconnect to the highest priority profile availableuntil connected if the wireless network is disconnected.Connection Priority:Sets the network connection priority when multiple profiles are available.Highest priority:Connects to the network with the highest priority profile.Priority order:Connects to an available network profile in the priority order.New button:Creates a new profile. (refer to the “Creating a new network profile”section.)Edit button:Edits the selected profile.Delete button:Deletes the selected profile.Scan button:Scans for access points and shows the access point information.Certificates & PACs button:Edits the certificates and PACs.- Notes - - The “Highest priority” is recommended if only one combination for the access pointSSID and security type is used.- If the “Priority order” is selected, the BHT attempts to connect to a profile one by onein the priority order until a connection is established. As a result, a connection maytake time to establish. The BHT may connect to an access point with a low priorityprofile unexpectedly in places where the multiple access points with the availableSSIDs and security types exist.- Point - The same SSID name can be used as a different profile with a different security, whenmultiple profiles with the same SSID name exist in a wireless network environment.Wireless LAN
