- 36 -5.5. Network and Dial-up ConnectionSets up a network and dial-up connection.To connect the BHT to a network, tap the “Network and Dial-up Connection” icon in thecontrol panel. Network Properties SettingsHold the stylus on the network connection icon created, toopen the hold down menu.Select the “Properties” menu to open the “IP Address” and“Name Servers” settings.Tab name DescriptionIP Address Obtain an IP addressvia DHCPCheck this radio button to automatically obtain an IP address(dynamic IP address) from the DHCP server.Specify an IP address Check this radio button to manually enter an IP address(static IP address), then enter an IP address.Name Servers Primary DNS: Enter the IP address for the Primary DNS server.Secondary DNS: Enter the IP address for the Secondary DNS server.Primary WINS: Enter the IP address for the Primary WINS server.Secondary WINS: Enter the IP address for the Secondary WINS server.Icon name DescriptionMake New Connection Creates a new network connection.Double tap the icon, then enter a newconnection name and select a connection typeby following the instructions given by thewizard.USB Serial Connects to a network via a cradle USB.LAN Connects to a network via a cradle LAN.WLAN Connects to a network via a Wireless LAN.- Note - Contact your network administrator for the IPaddresses.Network and Dial-upControl Panel
