- 115 -6.9.2. Device pairingThe following are three ways of pairing the BHT with a remote device.1. Pairing with a remote device from the BHT (local device).Step 1 Select a remote device from the remote device list.Step 2 Then hold down the device icon with the stylus to open the contextual menu.Step 3 Select “Pair” in the contextual menu to open the “Pair request W...” dialog.Step 4 Enter the PIN code and tap the “OK” button to start pairing.To cancel pairing, tap the “X” button.2. Pairing with the BHT (local device) from a remote device without using the “Default Pin”.A remote device is prompted to enter the PIN code when trying to pair with the BHT (local device).Enter the PIN code set for the remote device.(refer to “6.9.3 Properties and configuration” for the Default Pin)3. Pairing with the BHT (local device) from a remote device with the “Default Pin”.The PIN code prompt dialog will not be displayed.The BHT is paired with a remote device automatically.The following icons may appear during pairing.Pairing failed. Pairing succeeded. Pairing succeeded.(Service is connected.) (Service is not connected.)− Note − The BHT (local device) may be displayed as an “Unknown” remote devicetype in the remote device screen during pairing.The Bluetooth communication will not be affected by the type “Unknown”.To display the BHT device type correctly, perform a device inquiry from theremote device to search for the BHT before pairing.
