Dynex DX-32L150A11 User Manual

Also see for DX-32L150A11: Faqs Quick setup guide Firmware update User guide Service manual

8 Using the remote controlDX-32L/37L/40L/46LUsing the remote controlInstalling remote control batteriesTo install remote control batteries:1 Press down on the battery compartment cover lock, then removethe remote control cover.2 Insert two AAA batteries into the battery compartment. Makesure that the + and – symbols on the batteries match the +and – symbols in the battery compartment.3 Replace the cover. Make sure that the lock snaps into place.Battery precautions:• Dispose of batteries as hazardous waste.• Do not mix batteries of different types.• Do not mix old and new batteries. Mixing old and new batteries canshorten the life of new batteries and can cause old batteries to leak.• Remove batteries as soon as they become inoperable. Chemicals thatcan leak from the batteries can cause a rash. If the batteries leak,clean the battery compartment with a cloth.• If the remote control is not used for an extended period of time,remove the batteries.• Do not expose batteries to excessive heat such as sunshine, fire, orother heat sources.Aiming the remote controlTo aim the remote control:• Point the remote control towards the remote sensor on the frontof your TV.Notes:• Do not expose the remote control to shock or liquids.• Do not use the remote control in an area with high humidity.• Do not place the remote control in direct sunlight.• Do not place objects, such as furniture, between the remote controland the remote sensor.• The remote control may not work if direct sunlight or bright lightshines on the remote sensor. Either move your TV or change the angleat which you use the remote control.Programming a universal remote controlto work with your TVYou can operate your TV with a new or existing universal remotecontrol.To program your existing universal remote control:1 To program your existing remote control to work with yourDynex TV, see the table below for common codes. If you haveproblems programming your remote, or need a different remotecontrol code, visit www.dynexproducts.com for the latest remotecontrol code information.Codes for other remote controls are available online at:http://www.dynexproducts.com/universalcontrolcodes.aspxTips:• The brand name is often visible on the front of the universal remotecontrol, and the model number is often visible on the back.• The codes shown above are common codes, but are subject tochange. Please refer to Dynexproducts.com for the most up to datecodes.• If your universal remote control isn’t listed on the chart, refer to youruniversal remote control’s instructions and try codes for the brandsOrion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may needto try several codes before finding a match.2 Follow your universal remote control’s instructions to enter thecode you found in Step 1.Tips:• If your universal remote control has a code search feature, run a codesearch to identify a code that matches your TV. See your universalremote control’s instructions for details.• If your universal remote control has a “learn” feature, you canmanually program it using your TV remote to “teach” the commandsone at a time. See your universal remote control’s instructions fordetails.3 If all else fails, you must use a different universal remote controlthat can operate both your set-top box and your TV. Five suchremotes are listed on the chart, but many other compatiblemodels are available in the market.Dynex TV codes for universal remote controls(for all Dynex TVs manufactured after Jan. 1, 2007)Universal remote control manufacturer and modelPhilipsPHDVD5,PH5DSS,PMDVR8,PDVR8RCARCU807One for AllURC-6690SonyRM-VL600115 135 0464 8043Set-top box manufacturer and modelComcastM1057DishNetworkVIP508,VIP622MotorolaDRC800TIVOSeries 3, HDDirectTVRC230463 720 0463 0091 10463