Dynex DX-32L150A11 User Manual

Also see for DX-32L150A11: Faqs Quick setup guide Firmware update User guide Service manual

Changing channel settings 19DX-32L/37L/40L/46L2 Press or to highlight Channel, then press . The Channelmenu opens.3 Select the signal source of the channel you want to set up on thefavorites list.4 Press or to highlight Favorites, then press ENTER. Thefavorite channel list opens.5 Press or to highlight the channel you want to add to thefavorite list, then press ENTER to mark the channel. A checkmark appears if the channel is added to the list. The check markdisappears if you delete the channel from the list.Note: If the list has more than one page, press or to scroll throughthe pages.6 Press EXIT to close the menu.7 To select a channel in the favorite channel list, press FAVORITE,press or to highlight the channel, then press ENTER.Adding or changing a channel labelIf a channel is not already labeled, you can label the channel to make iteasier to identify. You can also relabel a channel that is already labeled.To label a channel:1 Press MENU. The Picture menu opens.2 Press or to highlight Channel, then press . The Channelmenu opens.3 Select the signal source of the channel you want to label.4 Press or to highlight Channel No., then press or toselect the channel you want to label.5 Press or to highlight Channel Label, then press ENTER.The Channel Label screen opens.6 Press or to select a character, then press or to move tothe next position. Repeat to add more characters.7 Press MENU to exit to the previous menu.SelectMove MENU ExitAuto ScanChannel No.Channel LabelDTV Signal:Audio SetupPicture Channel2.1NormalWGBH-SDTV Source AntennaShow/HideF avoritesPictureSelectMove MENU ExitPicture ModeContrastBrightnessColorTintAdvanced VideoAudio Setup ChannelCustom7040600Sharpness 50Backlight 30SelectMove MENU ExitAuto ScanChannel No.DTV Signal:Audio SetupPicture Channel2.1NormalTV Source AntennaShow/HideF avoritesChannel Label WGBH-SDSelectMove MENU ExitAudio SetupPicture ChannelABC ದ