Dynex DX-32L150A11 User Manual

Also see for DX-32L150A11: Faqs Quick setup guide Firmware update User guide Service manual

12 Turning on your TV for the first timeDX-32L/37L/40L/46LConnecting headphonesWarning: When using headphones, adjust the headphone volume toavoid excessively loud volume which can damage your hearing.To connect headphones:• Plug the headphones (not included) into the (headphone)jack on the side of the TV.Turning on your TV for the firsttimeTo configure your TV:1 Make sure that you have inserted the batteries in the remotecontrol, connected your devices to the TV, and connected the ACpower.2 Press (Power), then wait several seconds. The initial SetupWizard screen opens (only the first time you turn on your TV).3 Press or to select the menu language you want, then pressENTER. The Time screen opens.4 Press or to highlight Time Zone, then press or toselect your time zone. You can select Pacific, Alaska, Hawaii,Atlantic, Eastern, Central, or Mountain.5 If your viewing area observes daylight savings time, press orto highlight DST, then press or to select On.6 Press or to highlight Mode, then press or to selectManual (to set the date/time manually), or Auto (the date/timeare automatically set by the TV signal source, based on the timezone you selected).7 If you select Manual mode, make the settings as follows:• Press or to highlight Year, Month, or Day, then pressor to adjust the setting.• Set the time by pressing or to highlight Time, thenpress or to highlight the hour, minute, or AM/PM field.Press or to adjust the setting.8 Press ENTER. The Choose your Picture Mode screen opens.9 Press or to select Home Mode or Retail Mode, then pressENTER.If you select Home Mode, the Choose your TV source screenopens.-OR-If you select Retail Mode, a message stating “Are you sure youwant Retail mode? Since in this mode Energy saving is notrealized.” appears. Select Yes to proceed, or No to exit.10 Press or to select Antenna, Cable, or Cable/SatelliteBox, depending on the type of connection you have.• If you are using an antenna for a standard or HD TV signal,select Antenna.• If your cable is connected directly to the TV (without a tunerbox), select Cable.• If your cable is connected to your TV through a tuner box,select Cable/Satellite Box.11 Press when you have made your selection. The channel scanscreen opens.If you selected Antenna or Cable, your TV automatically scansfor available channels in your area and stores the channelinformation in the channel list. This may take several minutes.While scanning, the TV displays a progress report.– OR –If you selected Cable/Satellite Box, the auto scan is notnecessary and the screen will ask you to select the correct inputsource for your set top box. Press EXIT to close the menu.A V 2 I NL RVIDEO AUDIOS-VIDEO2 H D M I 3 S ERVICE PORT