Dynex DX-60D260A13 User Manual

Also see for DX-60D260A13: Important information Product specifications Quick setup guide User guide Quick setup guide

Contents

Making connections 13DX-60D260A13Using DVI (same as HDMI but requires an audioconnection)To connect a DVD or Blu-ray player using DVI:1 Make sure that your TV’s power cord is unpluggedand the DVD or Blu-ray player is turned off.2 Connect an HDMI-DVI adapter (not provided) to oneend of an HDMI cable (not provided), then connectthe adapter to the DVI OUT jack on the DVD orBlu-ray player.3 Connect the other end of the cable to theHDMI1/DVI jack on the side of your TV.4 Connect a 3.5mm audio cable (not provided) to thePC/DVI AUDIO IN jack on the side of your TV and tothe AUDIO OUT jacks on the DVD or Blu-ray player.5 Plug your TV’s power cord into a power outlet, thenturn on your TV.6 Turn on the DVD or Blu-ray player, then set it to thecorrect output mode. For more information, see thedocumentation that came with the player.7 Press INPUT to open the INPUT SOURCE list.8 Press S or T to select HDMI1, then press ENTER.Using component video (better)To connect a DVD or Blu-ray player using componentvideo:1 Make sure that your TV’s power cord is unpluggedand the DVD or Blu-ray player is turned off.2 Connect a component video cable (not provided) tothe VIDEO/Y, P B, and PR jacks on the side of your TVand to the COMPONENT OUT jacks on thecomponent video device.3 Connect an audio cable (not provided) to theAV IN AUDIO L/R jacks on the side of your TV and tothe L/R AUDIO OUT jacks on the DVD or Blu-rayplayer.4 Plug your TV’s power cord into a power outlet, thenturn on your TV.5 Turn on the DVD or Blu-ray player, then set it to thecorrect output mode. For more information, see thedocumentation that came with the player.6 Press INPUT to open the INPUT SOURCE list.7 Press S or T to select COMP/AV, then press ENTER.NoteYou must use the HDMI 1/DVI jack to connect a DVDor Blu-ray player using DVI. If you use another HDMIjack, you will not hear sound from the TV speakers.NoteYou can also press HDMI one or more times to selectthe DVD or Blu-ray player.Side of TVDVD or Blu-ray playerHDMI cable with DVI adapter3.5 mm audio cableNotes• The VIDEO/Y, P B, and PR video jacks (used toconnect a component device) share theAV IN AUDIO L/R jacks with the VIDEO/Y jack(used to connect a composite device).• When you connect the audio using theAV IN AUDIO L/R jacks, the audio output isanalog.NoteYou can also press VIDEO to select the DVD or Blu-rayplayer.Side of TVDVD or Blu-ray playerComponent video cableCables are often color-coded to match color-coded jacks.Note: The yellow video connector on the AV cable connects to the green VIDEO/Y jack.