Dynex DX-60D260A13 User Manual

Also see for DX-60D260A13: Important information Product specifications Quick setup guide User guide Quick setup guide

Contents

36 Restoring settings to defaultDX-60D260A13Displaying a list of INlink-compatible(HDMI-CEC) devicesYou can display a list of HDMI CEC devices that areconnected to your TV.To display a list of INlink-compatible devices:1 Press MENU. The on-screen menu opens with thePicture menu displayed.2 Press W or X to highlight Settings, then press T. TheSettings menu opens.3 Press S or T to highlight INlink, then press ENTER.The Settings-INlink menu opens.4 Press S or T to highlight INlink Device Lists, thenpress ENTER. A list of the HDMI CEC-compatibledevices you have connected to your TV appears.5 Press MENU to return to the previous menu, or pressEXIT to close the menu.Restoring settings to defaultTo restore settings to default:1 Press MENU. The on-screen menu opens with thePicture menu displayed.2 Press W or X to highlight Settings, then press T. TheSettings menu opens.3 Press S or T to highlight Reset to Default, thenpress ENTER. A confirmation box opens.4 Press W or X to select Yes (to reset all settings tofactory default), or No (to not reset).5 Press EXIT to close the menu.Using a USB flash driveYou can connect a USB flash drive to your TV to viewcompatible JPEG pictures.Switching to USB modeTo switch to USB mode:1 Make sure that you have connected the USB flashdrive to the USB port on the side of your TV.2 Press INPUT. The INPUT SOURCE list opens.3 Press S or T to highlight USB, then press ENTER.Note• HDMI cables must be used to connect HDMICEC-compatible devices to your TV.• The connected device’s HDMI CEC feature mustbe turned on.• If you connect an HDMI device that is not HDMICEC-compatible, the INlink Control optiondoes not work.CautionWhen you restore default settings, all the settingsyou have customized are reset.Notes• The JPEG picture viewer only supports JPEGformat images (with “.jpg” file extensions).• Not all JPEG files are compatible with your TV.NoteTo exit USB mode, press INPUT to open the INPUTSOURCE list, then select another input source.