Dynex DX-R13TV User Manual

Using the TV 11Setting the V-ChipAn age limitation can be set to restrict children from viewing or hearingviolent scenes or pictures that you may choose to exclude. The restrictionapplies to TV rating and movie rating if this data is transmitted. You mayset this restriction separately. To use the V-Chip function, you must set apassword.Notes:The V-Chip function is activated only on programs and input sources thathave the rating signal.It may take several minutes to complete the initial V-Chip setup.To avoid forgetting the password, write it down and keep it in a safe place.However, if you forget the password,--Set the volume to the minimum setting, then press the vo lume downbutton on the TV and the 0 button on the remote control at thesame time.--Hold for more than two seconds, then reset the password.Setting a passwordTo set a password:1 Press MENU/ENTER. The menu screen appears.2 Press the CH + and CH - buttons until the indicator next to V-CHIPSET flashes. then press the VOL + button. The PASSWORD screenappears.e3 Select and enter a password (4 digits) using the 0-9 numberbuttons, then press MENU/ENTER.4 Enter the same password again to confirm, then press MENU/ENTER to set the password.5 Press EXIT to return to the normal screen.Setting the V-ChipThe V-CHIP SET (DTV) can be selected only when the unit receives adigital broadcast using the new rating system. It may take severalminutes for the initial V-Chip Set-up to complete. At this time, somestations are still developing this signal. In those cases the V-CHIP SET(DTV) will not function.To set the V-Chip:1 Press MENU/ENTER. The menu screen appears.2 Press the CH + and CH - buttons until the indicator next to V-CHIPSET flashes. then press the VOL + button. The PASSWORD screenappears.e3 Enter your 4-digit password using the 0-9 number buttons, thenpress MENU/ENTER. The V-CHIP menu appears.4 Press the CH + and CH - buttons to select V-CHIP SET, then pressthe VOL + button. The V-CHIP SET menu appears.5 Press the CH + and CH - buttons to select TV RATING, then pressthe VOL + and VOL - buttons to display the desired rating.• OFF—TV RATING is not set• TV-Y—All children• TV-Y7—7 years old and above• TV-G—General audience• TV-PG—Parental guidance• TV-14—14 years old and above• TV-MA—17 years old and aboveWhen you select TV-Y7, TV-PG, TV-14, or TV-MA, press -/DISPLAYto further define the rating. Press the CH + and CH - buttons toselect the desired rating you want. Press the VOL + and VOL -buttons to select the setting ON or OFF.6 Press the CH + and CH - buttons to select MOVIE RATING, thenpress the VOL + button. The RATING menu appears.7 Press the CH + and CH - buttons to select the rating, then pressthe VOL + and VOL - buttons to select ON or OFF for each rating.• G—All ages• PG—Parental guidance• PG-13—Parental guidance less than 13 years old• R—Under 17 years old parental guidance suggested• NC-17—17 years old and above• X—Adult only8 Press MENU/ENTER twice to return to the V-CHIP menu, thenpress the CH + and CH - buttons to select V-CHIP.9 Press the CH + and CH - buttons to select ON. Your settings arenow set into memory.10 Press EXIT to return to the normal screen.Watching a protected showTo watch a program that is blocked by the V-Chip:1 After blocking a program using the V-Chip function, you cannotwatch the blocked program based on the content of the show.When the program starts, the PASSWORD screen appear on thescreen.2 To release the V-Chip temporarily, enter the password.---NEW---