WALL-MOUNTED BYPASS SWITCH INSTALLATIONEaton 9155 UPS (8–15 kVA) User's Guide 164201553 Rev G (www.eaton.com/powerquality)36Wall-Mounted Bypass Switch SetupTo set up the wall-mounted bypass switch:1. Remove the knockouts in the bottom or side of the bypass switch for AC LineInput, AC to UPS Input, AC from UPS Output, and AC to the UPS load (seeFigure 24).Figure 24. Wall-Mounted Bypass Switch Knockouts2. Mount the bypass switch cabinet to a sturdy surface within sight of the UPS. Youmay need to rotate the cabinet 90 degrees to enable operator access to thebypass switch.3. Remove the six screws from the bypass switch front cover and remove thecover (see Figure 24).4. Remove and discard any packing material from inside the bypass switch.