Eaton 93PM User And Installation Manual

Also see for 93PM IBC-L: User and installation guide Manual Installation and operation manual User and installation guide Installation manual

Contents

P-164000249 30–50kW 3Revision 1 User's and Installation GuideCAUTION• Installation or servicing should be performed by qualified service personnelknowledgeable of batteries and required precautions. Keep unauthorized personnel awayfrom batteries. Consider all warnings, cautions, and notes before installing or replacingbatteries. DO NOT DISCONNECT the batteries while the UPS is in Battery mode.• Replace batteries with the same number and type of batteries as originally installed in theUPS.• Disconnect the charging source prior to connecting or disconnecting terminals.• Determine if the battery is inadvertently grounded. If it is, remove the source of theground. Contacting any part of a grounded battery can cause a risk of electric shock. Anelectric shock is less likely if you disconnect the grounding connection before you workon the batteries.• Proper disposal of batteries is required. Refer to local codes for disposal requirements.• Do not dispose of batteries in a fire. Batteries may explode when exposed to flame.• Keep the UPS door closed and front panels installed to ensure proper cooling airflow andto protect personnel from dangerous voltages inside the unit.• Do not install or operate the UPS system close to gas or electric heat sources.• The operating environment should be maintained within the parameters stated in thismanual.• Keep surroundings uncluttered, clean, and free from excess moisture.• Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outsideof the equipment.1.1 AudienceThe intended audience of this manual are people who plan the installation, install, commission anduse or service the UPS. This manual provides guidelines for checking the delivery, installing andcommissioning of the UPS.The reader is expected to know the fundamentals of electricity, wiring, electrical components andelectrical schematic symbols. This manual is written for a global reader.NOTERead the manual before operating or working on the UPS.