Eaton 93PM User And Installation Manual

Also see for 93PM IBC-L: User and installation guide Manual Installation and operation manual User and installation guide Installation manual

Contents

P-164000249 30–50kW 69Revision 1 User's and Installation Guide12 APPENDIX A: User settingsThe UPS has the following settings that are user modifiable. In the Home screen, select Settings.User settings:Setting DescriptionInfo Information on the UPS model, including part number andserial number.About Version information.Table 12-1: User settingsTo modify the Config settings, you need to sign in.Setting DescriptionLanguage Change the user interface language.Unit Name Change the unit name.Clock Change the date and time, change the clock format orenable/disable NTP clock setup.Signal Inputs Select signal input name and function.Relay Outputs Configure the relay outputs.Battery Test Change the power level and duration for battery test.Bypass Limits Change bypass voltage, bypass frequency or bypass slewrate limits.Screen Saver Timeout Change the screen saver timeout.Meters Change the meters format.Lamp Test Enable the lamp test.HMI backlight Adjust the backlight brightness.Control P/W level 1 Change the level 1 password, or remove the password onlevel 1. The default value is 1111.Config P/W level 2 Change the level 2 password. The default value is 101.Config P/W level 3 Level 3 configurations are for trained service personnelonly.Table 12-2: Config settings

/ 77

Related manuals for Eaton 93PM IBC-L