Eaton Airflex VC 5000 Installation, Operation And Maintenance Manual

Also see for Airflex VC 5000: Installation, operation and maintenance manual

SINGLE NARROW & SINGLE WIDEDevice I JFig. 4DUAL NARROW OutboardElementn-5\Brake ReactionDUAL WIDE Outboard BracketFig. 5/Element2.1.4 Figure 6 illustrates a typical marine mainpropulsion application. In this arrangement,the element is attached to a pinion adapterplate and the drum and drum hub are attachedto a quill shaft. A manifold is attached to theoutboard end of the element for bearingsupport of the quill shaft.* Pinion1111 I-Adaptert J IManifoldFig. 32.1.2 Figure 4 illustrates the gap-mounting arrange-ment with an axial locking device. The axiallocking device restricts the relative axialmotion between the driving and driven shafts.This arrangement is typically used where asynchronous motor armature with plain bear-ings must be held on magnetic center.\QuillShaft2.1.3 Figure 5 illustrates a typical VC brake applicao9tion. The drum and drum hub are attached tothe shaft which is to be stopped. The elementis attached to a rigid reaction bracket. Fig. 64 0 Copyright Eaton Corp., 1989. All rights reserved.VC 5000Revised: July, 1995 (PDF format)