Eaton Cooper Power Series Assembly And Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Contents

Eaton Cooper Power Series Assembly And Installation Instructions Manual Manual pdf 13 page image

7. Attach the upper ends of the long cross braces (Item 7)to the upper posts (Items 2 and 3) and lower posts(Items 4 and 5). Use 1.50” hex head capscrews (Item10), and secure with lockwashers (Item 14) and .5” hexnuts (Item 13). See Figure 11.8. Attach the lower ends of the long cross braces (Item 7)to the lower posts (Items 4 and 5), with 1.25” hex headcapscrews (Item 9), and secure with lockwashers (Item14) and .5” hex nuts (Item 13). See Figure 11.9. Attach the long cross braces (Item 7) at their midpointwith 1.25” hex head capscrews (Item 9), and securewith lockwashers (Item 14) and .5” hex nuts (Item 13)See Figure 11.10. Check frame alignment and securely tighten all nutsand screws.Frame installationInstall the substation frame on the constructed mountingpad. See the Frame Foundation section of this manual.Firmly tighten all of the substation assembly hardware afterattaching the frame to the mounting pad. See Figure 12.Figure 11. Attaching long cross braces (Item 7).59, 13, 14710, 13, 14400 mm(15.75 in)9, 13, 14445Figure 12. Installing substation frame on mounting pad.552 mm(21.75 in)457 mm(18 in)1060 mm (41.75 in)965 mm (38 in)19 mm (3/4") Holesfor 16 mm (5/8") Anchor BoltsItem 4Item 4Item 5Item 59SUBSTATION FRAME KNOVA59-1 AND KNOVA59-3 ASSEMBLY AND INSTALLATION INSTRUCTIONS MN280043EN January 2016