Eaton Cutler-Hammer RMS 510 Instructions Manual

Also see for Cutler-Hammer Digitrip RMS 510: Instructions Instructional Leaflet Instruction leaflet

I.L. 29-885B Page 13Note: The battery can be replaced at any time, evenwhile the circuit breaker is in service, without affect-ing the operation of the circuit breaker or its protec-tion function.obtained from the following companies under their typedesignation indicated:CompanyVarta Batteries, Inc.150 Clarbrook RoadElmsford, N.Y. 10523DuracellSouth BroadwayTarrytown, N.Y. 10591(914) 591-7000Sanyo Electric Inc.Battery Division200 Riser RoadLittle Ferry, N.J. 07643ModelCR 1/3NCAUTIONDL 1/3NCARE SHOULD BE EXERCISED WHEN REPLACINGA BATTERY TO INSURE THAT THE CORRECTPOLARITIES ARE OBSERVED. POLARITY MARK-INGS ARE SHOWN ON THE RATING PLUG WHENTHE HINGED COVER IS OPEN AS INDICATED INFIG. 6.The replacement battery should be the same type orequivalent. Acceptable 3.0 volt lithium batteries may beCR 1/3NValues forShort Delay SI and S2Instantaneous Ml and M2Rating Plug Retention RerowRating Plug is for TypeIDS Circuit Breakers: Only ~~ Battery Removal Tab/Pull Tab toSettings; Remove BaitRating Plugs tor R-Fremeand SPB Breakers areSimitarBatteryRatingPlugIdentification;'BatteryCheck"PushbuttonFig. 6 Typical Rating PlugFig. 7 Auxiliary Power ModuleFAT'NEffective May 1997