Eaton E Series DX User Manual

Also see for E Series DX: Manual User manual

Contents

Safety InstructionsOperation Safety1. Prior to installation and operation, please read “Safety Instructions” carefullyto ensure correct and safe application. Please retain this manual for futurereference.2. During operation, attention should be paid to all warning symbols and operatinginstructions should be followed strictly.3. Equipment must not be installed in environments that are directly exposed tosun, rain or condensing humidity.4. The equipment should not be installed close to thermal sources or any areawhere there is presence of devices such as electric heaters and furnaces.5. Make sure that adequate clearances are kept for proper ventilation and productmaintenance. Refer to the installation instructions in this manual.6. Dry and non-conductive items should be used for cleaning.7. In case of a fire hazard, dry powder extinguishers should be used. Using liquidfire extinguisher may result in electric shock hazard.8. Floor loading capacity should be taken into consideration prior to installation.9. Ensure that the load power requirement is matched to the UPS rating.Warning1. There is high voltage inside the UPS, only qualified personnel should removeany covers or panels to gain access to the UPS internal circuitry or batteries.2. When applied to the following types of equipment, please contact the distributoror Eaton prior to installation, as there may be special design, application andmaintenance requirements:A. Precision industrial, scientific and medical instruments and equipment;B. Equipment that might endanger physical safety such as elevators etc;C. Load equipment with large startup current and/or regenerative power.3. Do not place battery to fire in order to avoid possible explosion.