Eaton Lumark Crosstour MAXX Installation Instructions Manual

Also see for LUMARK Crosstour MAXX: Installation instructions

INS #Brand Logoreversed out ofblackINS #IB514011ENInstallation Instructions – Crosstour MAXX Replacement DriverOptionsInstructions D’installation – Options de Remplacement de Pilote deLuminaire Crosstour MAXXInstrucciones de Instalación – Opciones para Controlador deReemplazo Crosstour MAXXIMPORTANT: Read before installing fixture. Retain for future reference.SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes andordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure underinstallation section.WARNINGMake certain power is OFF before starting installationor attempting any maintenance.WARNINGMake certain power is OFF before starting installationor attempting any maintenance. Risk of fire/electricshock. If not qualified, consult an electrician.WARNINGRisk of Electric Shock—Disconnect power at fuse orcircuit breaker before installing or servicing.WARNINGRisk of Burn—Disconnect power and allow fixture tocool before servicing.WARNINGRisk of Personal Injury— DO NOT mount luminairewithin 6” of a combustible surface. DO NOT handleluminaire by the lens.WARNINGRisk of Personal Injury— Fixture may becomedamaged and/or unstable if not installed properly.Tighten all fixture components to their recommendedtorque values. Do not lift pole into place by securinglifting device to lighting fixture or mounting arm.ote:N These instructions do not claim to cover alldetails or variations in the equipment, procedure,or process described, nor to provide directionsfor meeting every possible contingency duringinstallation, operation or maintenance. Whenadditional information is desired to satisfy aproblem not covered sufficiently for user’s purpose,please contact your nearest representative.ote:N Specifications and dimensions subject to changewithout notice.