OverviewFeaturesBack featuresCeiling Microwave presence/absence detector 12-24V AC/DCMPAD-C-A 12-24VMicrowave SensorDetects movement within the unit’s detection range,allowing load control in response to changes in occupancy.IR ReceiverReceives control and programming commands from anIR (infrared) handset.Light Level SensorMeasures the overall light level in the detection areaStatus LEDsThe LED flashes Red to indicate the following:Power Input & Output ConnectorUsed to connect power to the unit and to connect aswitched load.Switch Input ConnectorTwo input terminals can be used to manually override thelights on or off.Walk Test LED active when movement is detectedValid setting receivedRetaining SpringRetaining SpringPower Input &OutputConnectorSwitch InputConnectorFront featuresThe MPAD-C-A 12-24V Microwave presence detectorprovides automatic control of low voltage loads includinglighting and BMS systems with optional manual control. TheMPAD-C-A 12-24V detects movement using a highlysensitive microwave detector. This works by emitting lowpower microwave signals and measuring the reflections asthe signals bounce off moving objects.Functioning as a presence detector, the unit can turn lightson when a room is occupied and off when the room isempty. Optional settings allow lights to be turned off inresponse to ambient daylight.The MPAD-C-A 12-24V has a unique adjustable sensorhead that allows the area of detection to be optimised forthe application.All functionality is fully programmable using an IR handset.Sensor Lenswhich covers...Microwave SensorIR ReceiverLight Level SensorStatus LEDsMounting BezelProduct Guide