Eaton Network Card-MS Quick Start Instructions P-164000507—Rev 1 24Figure 16. Example Completion E-mail

Section 1 Installation Checklist

Section 2 Install the Card

Section 3 Connect the Card to the Computer

Section 4 Initialize the Card Configuration

Eaton Network Card-MS Quick Start Instructions P-164000507—Rev 1

Section 5 Obtain a DHCP-assigned IP Address

displays (see Figure

Section 6 Assign an IP Address Manually

Section 7 Disable Browser Compatibility Mode

Section 8 Register a PredictPulse Subscription

Eaton Network Card-MS Quick Start Instructions

Network Card-MS

special symbols

INTRODUCTION

GETTING STARTED

Card Details

Card Defaults

Installing the Card

Installing the Optional Environmental Monitoring Probe

Configuring the Card

Configuring the Network With a DHCP Server

Configuring the Network Without a DHCP Server

Testing the Configuration

Logging In

UPS Properties

UPS Measurements Detail

UPS Status List

View Current Alarms

View UPS and Card Information

UPS Control

UPS Weekly Schedule Programming

Shutdown Parameters

UPS Shutdown (Master)

Measurements

Event Log

Notification

E-Mail Message Settings

Sending Text Messages

Network Settings

System Settings

Notified Applications

Central Shutdown Configuration

Access Control

SNMP Settings

Date and Time

Environmental Monitoring Probe

Environment Status

Environment Settings

USING THE TELNET/SSH/CLI INTERFACE

Starting and Ending a Session

Using the CLI Interface

General Commands

Trap Receiver Commands

System Commands

Shutdown Commands

Access Control Commands

Enviroment Commands

Default Login/Password

MIB OBJECTS

Eaton Pulsar MIB

Traps

OPERATION AND MAINTENANCE

Upgrading the Firmware

SHUTDOWN

Load Segments

Sequential Startup

Power Restoration Before End of Shutdown Duration

Shutdown Management With Two Network Card-MS Cards

SPECIFICATIONS

SERVICE AND SUPPORT

Two-Year Limited Warranty (US and Canada)