Eaton Powerware Series User Manual

Also see for Powerware Series: Installation and operation manual User guide User guide User guide User guide

Contents

INSTALLATIONEaton® PowerPass® Distribution Module (2500/3000 VA) User's Guide 164201798 Rev 2www.eaton.com/powerquality153. Plug the provided UPS cord (L5-30P) into the UPS-output connectoron the PDM rear panel.Bypass SwitchUPS-Output ConnectorPDM Power CordUPS Power CordUPS-Input ConnectorPDMUPSOutput Receptacles(six 5-20R)UPS Cord (L5-30P)Figure 5. Typical Low-Voltage Installation [PDM2-LV-US-P1 (EPPDML3000R-2U-4)Shown]4. Plug the equipment to be protected into the PDM outputreceptacles. Distribute the load evenly between the rows ofreceptacles.NOTE DO NOT protect laser printers with the UPS because of the exceptionally high powerrequirements of the heating elements.5. Plug the PDM power cord into a power outlet.All front panel indicators flash briefly and the UPS conducts aself‐test.6. Press the On/Off Button on the UPS front panel for at least onesecond.The UPS front panel display changes status to “UPS starting...” andthe indicator illuminates solid. The UPS is now in Normal modeand supplying power to your equipment.