Eaton SC100 Operation Handbook

Also see for SC100: Installation and operation guide Installation and operation guide Operation handbook

Contents

SC100 Handbook22 Copyright © 2008-2011 Eaton Corporation. All Rights Reserved.IPN 997-00012-63C August 2011RectifiersThe SC100 registers all rectifier modules as they are inserted into the dc power system.InformationThe following information is available from rectifiers.Parameter Description Where to find:Software Version Version of rectifier embedded software. SC100: Menu > Identity >Rectifier IdentityDCTools: Configuration >RXPSerial Number(S/N)Rectifier serial number. SC100: Menu > Identity >Rectifier IdentityDCTools: RectifiersPower Rectifier output power as a percentage of Max. PowerLimit.State Registered - communicating with the SC100.Un-registered - there is a rectifier compatibility orcommunications problem.DCTools: RectifiersAC Voltage The ac voltage measured by the rectifier.Voltage Rectifier's dc output voltage. This is the Float Voltageadjusted by any the voltage control processes such asTemperature Compensation, Active Voltage Control,and so on. See further details on page 14.Current Rectifier's output current.Heatsink Temp The measured rectifier heatsink temperature.Max Power Limit Rectifier's maximum output power (factory set).Max Current Limit The maximum dc current limit value of the rectifier. Adjust Rectifier Current Limit to set a loweroperating current limit.Max AC CurrentLimitThe maximum ac current limit value of the rectifier. Adjust Rectifier AC Current Limit to set alower operating current limit.Status Information about rectifier alarms.