Eaton VCP-W Series Instruction Book

Also see for VCP-W Series: Instructions for installation/operation/maintenance/servicing Instruction leaflet

Contents

7Instruction Book IB182312EN June 2016 www.eaton.com50/75/150 VCP-WSelectable Ground and Test DeviceSECTION 3: RECEIVING, HANDLING, ANDSTORAGESelectable ground and test (SG&T) devices are subjected tocomplete factory production tests and inspection before beingpacked. They are shipped in packages designed to provide maximumprotection to the equipment during shipment and storage and at thesame time to provide convenient handling.3.1 RECEIVINGUntil the selectable ground and test device is ready to be deliveredto the switchgear site for installation, DO NOT remove it from theshipping crate. If the selectable ground and test device is to beplaced in storage, maximum protection can be obtained by keepingit in its crate.Upon receipt of the equipment, inspect the crates for any signs ofdamage or rough handling. Open the crates carefully to avoid anydamage to the contents. Use a nail puller rather than a crow barwhen required.When opening the crates, be careful that any loose items orhardware are not discarded with the packing material. Check thecontents of each package against the packing list. Examine theselectable ground and test device for any signs of shipping damagesuch as broken, missing or loose hardware, damaged or deformedinsulation and other components. File claims immediately with thecarrier if damage or loss is detected and notify the nearest Eaton’sElectrical Services & System office.Tools and AccessoriesRacking Handle: The racking handle is used to drive the rackingmechanism which moves the SG&T device into and out of thecell. This racking handle is the same one provided with the originalVCP-W Vacuum Circuit Breaker and therefore is not provided as partof the SG&T device. (Figure 3.1.1)Figure 3.1.1. Racking Handle3.2 HANDLING WARNINGDO NOT USE ANY LIFTING DEVICE AS A PLATFORM FOR PERFORMINGMAINTENANCE, REPAIR OR ADJUSTMENT. THE SELECTABLE GROUNDAND TEST DEVICE MAY SLIP OR FALL CAUSING SEVERE PERSONALINJURY. ALWAYS PERFORM MAINTENANCE, REPAIR AND ADJUSTMENTSON A WORKBENCH CAPABLE OF SUPPORTING THE SELECTABLE GROUNDAND TEST DEVICE TYPE.VCP-W selectable ground and test device shipping containers aredesigned to be handled by a forklift truck. If containers must beskidded for any distance, it is preferable to use roller conveyors orindividual pipe rollers.Once a SG&T device has been inspected for shipping damage, it isbest to return it to its original shipping crate until it is ready to beinstalled in the Metal-Clad Switchgear.When a selectable ground and test device is ready for installation, alifting harness in conjunction with an overhead lift or portable floorlift can be used to move a SG&T device. This could be preferable torolling the SG&T device on the floor using self-contained wheels.If the SG&T device is to be lifted, position the lifting device (liftingstraps should have at least a 1600 lb capacity) over the SG&T. Standa safe distance away from the device while lifting and moving.Figure 3.2. Lifting 150 VCP-W-SG&T