Eaton XC200 Series User Manual

10/10 MN05003004Z-EN Target system specific libraries27XS40_MoellerFB.libYou can find the descriptions of the “XS40_MoellerFB” in the“Function Blocks for easySoft CoDeSys“ manual(MN05010002Z-EN; previously AWB2786-1456GB).Libraries of the “Lib_CPU101”Libraries which are required for the XC100 target system arecompiled together in the “Lib_CPU101” library.The libraries designated with “1)” include functions for theCANopen fieldbus. The CANopen bus expansion is described in theapplication notes regarding the CANopen bus. The applicationnotes provide information concerning the following topics:• XC-...-XION: Connection of the XION products (AN2700K18GB)• XC-...-XC: Network variables (AN2700K19GB)• Coupling multiple autonomous controls (CAN-Device) viaCANopen (AN2700K20GB).• Engineering of CAN stations (AN2700K27GB).“Counter.lib” library:The COUNTER library provides functions in order to integrate theXIOC-1CNT-100KHZ and XIOC-2CNT-100KHZ counter modules inthe XC100 system.The description of the COUNTER library can be found in the“Function blocks for easySoft-CoDeSys “ manual(MN05010002Z-EN; previously AWB2786-1456GB) in the“Counter modules: counter.lib” section.“RTCLib” libraryThe “RTCLib” library provides read and write functions for accessto the real-time clock.The description of the “RTCLib” library can be found in the“Function blocks for easySoft-CoDeSys“ manual(MN05010002Z-EN; previously AWB2786-1456GB) in the“Clock modules: RTCLib.lib” section.Figure 31: Function blocks of the “XS40_MoellerFB.lib”Figure 32: Function blocks of the “Lib_CPU101”Figure 33: Function blocks of the “Counter.lib”Figure 34: Function blocks of the “RTCLib.lib”