Creating a sample project 10/10 MN05003004Z-EN54Writing a programAs described in the description of the task on Page 47, a logicalAND combination is to be made between input I0.0 and input I2.7.The result of this logical operation is to be presented at outputQ0.3.X Select the “POUs” tab and double click on the “PLC-PRG”element. The declaration and program window will be opened.X Create the declaration and the program, as shown in thefollowing diagram, and then compile the project.X Load the project into the controller.X Test the project.I0.0 AND Q0.3I2.7Figure 74: Program and declaration windowFigure 75: Compiled program

Eaton XC200 Series User Manual