Eaton XV300 Series Manual

Also see for XV300 Series: Manual Manual

Contents

5. External connections5.2 SD card5.2 SD cardThe slot for the SD card is on the side of the XV300 unit.CAUTIONDATA LOSSIf the SD card is being written to and a voltage drop occurs or the card isremoved, data may be lost or the SD card may be ruined.Insert the SD card only when the XV300 is de-energized.Avoid writing to SD cards. Reasons:l SD cards have a limited number of write cycles.l If there is a voltage drop while a write operation is in progress, data loss is highlylikely to occur.Remove the SD card only when the XV300 is de-energized.Before switching off the device, make sure that there are no programs writingto the SD card.Inserting the SD cardSD cards cannot be inserted the wrong way around.Do not use force when inserting the card.Push the SD card into the SD card slot until you feel it lock into place.Removing the SD cardPush the SD card into the SD card slot all the way to the stop.Pull the SD card out of the SD card slot.Store the SD card in its case in order to protect it.XV300 12/15 MN048017 EN www.eaton.eu 49