5. External connections5.8 XV300 Touch Panel as a SmartWire-DT® coordinator5.8 XV300 Touch Panel as a SmartWire-DT® coordinatorApplies only to XV-3.3-..-.E.-...-.. XV300 units with a SmartWire-DT® connection.In addition to the information in this document, you will also need the information in thefollowing documents in order to set up a SmartWire-DT® network and install and oper-ate it using the SmartWire-DT® master:System description, engineering, installation, commissioning, and diagnostics for aSWD networkSmartWire-DT® The System Manual MN05006002ZSetup, engineering, installation, etc. for the individual SWD modulesSmartWire-DT® Module Manual MN05006002ZUsing the XSOFT-CODESYS-2 programming tool and the PLC runtime system for XV300with Windows CE7.User ManualXSOFT-CODESYS 2, PLC programming XV300MN048015ZU5.8.1 SmartWire-DT® powered via POW/AUXThe POW/AUX- interface is not electrically isolated.CAUTIONNON-GALVANICALLY-ISOLATED INTERFACESThe XV300 may be damaged by potential differences.The GND terminals of all bus modules must be connected.Do not connect the connector to the XV300 or disconnect it without first de-energizing the system.Electrical connectionPower supply SmartWire-DT®POW/AUXFigure 32: SmartWire-DT® power connectorXV300 12/15 MN048017 EN www.eaton.eu 59
