Eaton Xanura BSX1 Manual

16MBO 1991 492-401 DARed LED is flashing.Red LED is flashing.Green LED lights up.After approx. 5 sec. the red LED flashes once or twice.LED flashes once (movement sensor always reacts).LED flashes twice (movement sensor only reacts when it is dark).Red LED is flashing.Red LED is flashing.Green LED lights up.After approx. 5 sec. the red LED flashes once, twice … or … 9 timesLED flashes once (switch off signal after 1 min.).LED flashes twice (switch off signal after 2 min.).…LED flashes 9 times (switch off signal after 256 min.), see table below.Flashes 7 times for 64 minutesFlashes 8 times for 128 minutesFlashes 9 times for 256 minutes© 2005 Eaton Electric B.V. Partial or complete reproduction is granted with written permission of Eaton Electric B.V. MBO 1991 492-401 DA/SWB/SG/June 2005Eaton Electric B.V.P.O. Box 237550 AA HengeloThe NetherlandsTel.: +31 74 246 70 00Fax: +31 74 246 33 02steunpunt@eaton.comwww.et-installateur.nlwww.xanura.comEU - Declaration of Conformitywe Eaton Electric B.V.Europalaan 202, 7559 SC Hengelo, The Netherlandsdeclare that the product:Xanura™ home automation unitconsisting of:• Movement sensor, RF, type BSX1complies with the definitions in 3, Annex IV of the R&TTE guideline 99/5/ECand that the following standards have been applied:Radio: EN 300 220-1EMC: ETS 300 683Electrical safety: EN 60 950date Steven Castelein07/03/05 Director Eaton Electric B.V.This product has been approved for use in all EuropeanUnion Member States. The transmission frequency 433.92MHz has not been harmonised yet.

/ 6

Related manuals for Eaton Xanura BSX1