Eaton XanuraHome RFIX35 Manual

Contents

44 MBO 6012349G01 001Programming of the RFIX35Programming modeIn the programming mode the RFIX35 can be programmed toreceive only one user defined letter code (= select one lettercodefrom A to O) or to receive all letter codes (A to P). When only oneletter code is programmed, the RFIX35 will only receive instructionsfrom remote controls within the receiving reach of the RFIX35programmed on the same letter code. If for example the RFIX35 isprogrammed on letter code B, the remote control also has to beprogrammed on letter code B.Security learn modeIn the security learn up to 8 RF-secured remote controls can belinked to the RFIX35. Once the RFIX35 is programmed to function inRF-secured mode, the RFIX35 will only accept RF-instructions fromlinked remote controls. RF-instructions from other remote controlswithin the receiving reach of the RFIX35 will be ignored. In thismode you can also clear the memory of the RFIX35. All remotecontrols linked to the RFIX35 will then be deleted. In this mode youcan also program the standard* receiving mode (non-secured)whenever you have programmed the RF-secured mode previously.Operation modeIn operation mode the RFIX35 will receive RF instructions fromremote controls and transpose them into XanuraHome commandson the power line.*) Default is standard mode programmed to letter code A.