Eaton XanuraHome RFIX35 Manual

Contents

58 MBO 6012349G01 001TroubleshootingProblem: The LED on the RFIX35 does not flash when I press theremote control.Cause: The remote control batteries are (almost) flat.Solution: Replace the batteries.Cause: The remote control (ABX1) is in the IR mode and not in theRF mode.Solution: Set the remote control to a RF transmitter.Cause: The RFIX35 is not set to the same letter code as the remotecontrol.Solution: Program in the same letter code on the remote control and theRFIX35 or program the RFIX to letter code P.Cause: The remote control is not programmed to the RF-secured modebut the RFIX35 is.Solution: Set the remote control to the RF-secured mode.Cause: The remote control is programmed to the RF-secured mode butthe RFIX35 is not.Solution: Set the remote control to the standard receive mode.Cause: The RFIX35 is in the RF-secured mode and the remote control isnot linked.Solution: Link the remote control in the RF-secured mode.Cause: RF signals are not received.Solution: Reduce the distance between the remote control and the RFIX35.