Eaton XanuraHome RFIX35 Manual

Contents

54 MBO 6012349G01 001Installation methods (cont'd.)• If the mains lead supplied is used, the wire ends must beinstalled up to the insulation in the connector. There must notbe any bare copper visible.• Ensure that the built-in antenna is at a sufficient distance frommetal parts and cabling.• Never install the RFIX35 against a metal rear wall.• Install the RFIX35 at a sufficient distance from otherRF transmitters, such as WIFI routers and DECT telephonesetc. This equipment can interfere with the reception of theRFIX35. Install the RFIX35 at least 1.5 metres from suchequipment, as centrally as possible in the home (in electricalterms).• To prevent short circuits, this product should only be usedinside and only in dry spaces. Do not expose the componentsto rain or moisture. Do not use the product close to a bath,swimming pool etc.• Do not expose the components of your systems to extremelyhigh temperatures or bright light sources.• Only connect the product to the mains after checkingwhether the mains voltage is the same as the values on theidentification tags. Never connect a power cord when it isdamaged. In that case, please contact your supplier.