46 MBO 6012349G01 001Programming the RFIX35 (cont'd.)Programming the letter code for the RFIX35Activate the programming mode by keeping the programmingswitch pressed for 3 to 6 seconds. The LED will now lit.Send the setup command twice (letter code and number code),through the power line by using e.g. Programming Unit (PUX),Xanura Home Control Box or other A10 / X10 compatibletransmitters. The LED will blink twice after receipt of twoidentical setup commands (Address). Letter code "A" to "P" maybe programmed. For example, to program letter code B, sendB01 twice.1Press the programming switch in with apointed object.

technische gegevens

Eaton XanuraHome RFIX35 Manual