Eaton XanuraHome RFIX35 Manual

Contents

50 MBO 6012349G01 001Programming the RFIX35 (cont'd.)accept any remote control. The LED of the RFIX35 will be lit for2 sec. and will return to the normal operation mode withoutstoring the remote control. If you accidentally link a remotecontrol that was already linked it will be accepted without"claiming" any extra memory space.Note: If the same remote control is linked with anew random generated security code, extra memoryspace will be claimed.The RFIX35 will automatically return to the operation mode whenit does not receive any commands within 60 seconds.Delete all linked remote controls from memoryIf you have already linked 8 remote controls and want to link a newremote control to the RFIX35, you will first have to clear thememory of the RFIX35. This is possible by first setting the RFIX35in the RF-secured programming mode (keep programming switchpressed and release the switch after 6 seconds. The LED will givequick short blinks). In the RF-secured mode press the programmingswitch and keep it pressed. Release the programming switch after9 seconds. All previously linked remote controls are now deleted,the memory is cleared. You can now start the procedure aspreviously described to link up to 8 remote controls again.3!