Eaton i-on16 Installation Manual

Also see for i-on16: Quick user guide Administrator's and user guide

Technical Specification i-on16Page 226. Technical SpecificationSpecificationGeneralProduct name i-on16.Product Description 16 radio zoneendstation with remotekeypad.Manufacturer Eaton’s SecurityBusinessEnvironmental Class II.OperatingtemperatureTested -10 to +55°C.Dimensions:End station 384 x 245 x 94, mmHxWxD.i-kp01 115 x 156 x 34, mm HxWxDKEY-K01/KP01/KPZ01 128 x 128 x 29, mm HxWxDWeight:End station 2.1 kg (without stand-bybattery).i-kp01 0.26 kgKEY-K01/KP01/KPZ01 0.19 kgCase material ABS.Zones 16 radio.Remote controls 16.Hold Up Alarms 16.Outputs 4 wired.Internal Clock ±10 minutes over oneyear (depending on theaccuracy of the mainssupply frequency).Log capacity 250 events mandatory,15 non-mandatory,stored in flash memory(requires no supportbattery)SecuritySecurity Grade Grade 2.Radio detectordiffers16,777,214 (224 -2).Radio Supervision Programmable.Access code 4 digits, all four digits maybe any number 0 to 9,giving 10,000 differs.Number of usercodes16 plus installerCode blocking Blocked for 90s after fourincorrect codes in series.Proximity tagdiffers4,294,967,296 (232)RadioRadio Section Operating frequency868.6625MHzNarrowband.EN 300 220-3.EN 300 330-2TeleficationTransmitter range The range of thetransmitters compatiblewith this control unitdepends on theenvironment in which theyare installed. As aguideline, mosttransmitters will work up200m range in free spaceconditions.CommunicationsUses plug on modules with proprietary interfacebetween control unit and module.Note: Not suitable for a policed system.I-SD01 Communication Module/PSTNThe I-SD01 module provides connection to thePSTN. The module allows both speech messagingand alarm signalling. When fitted to the control unitspeech messages can be configured to be up to30s long (one 10s home message and fourconsecutive alarm messages of 5s each).The I-SD01 module meets the performance criteriaof D2, M2, S1, I0, T2 and A0 as described inEN50136-1-1 subject to network conditions.ATS rating ATS 2 (EN50131-1)This product can share a PSTN line with othertelephony or fax equipment.REN 1Power SupplyThis product complies with the requirements ofEN50131-6 Type A power supply at Grade 2 andenvironmental class 2.Mains power supply 230VAC +10%/-15%,170mA max, 50Hz.End station psu 13.7VDC, 1.5A maxEnd stationconsumption145mA.Communicatorconsumption50mA maxi-kp01 powerrequirement:30mA (normal/idle)45mA (backlight low)65mA (backlight high)KEY-KPZ01/KP01/K0135mA backlight OFF,internal prox reader only.65mA max backlight ON,external prox readerconnectedStandby Battery 12V, 7Ah sealed leadacid.Standby time: More than 12 hours.Max recharge time:. Less than 72 hoursBattery charge limit 270mA12V Aux supply (incLS)13.7VDC +0.1/-0.4 @850mA max.14V4 supply 14.4V +0.1/-0.2 @230mA12V Keypad bus 13.7V =0.1/-0.5 @400mA max

/ 28

Related manuals for Eaton i-on16