54Various SettingsSwitching the SoundAdjustment ModeThe Menu Selection mode is activated.The sound adjustment mode isactivated.When the button is pressed, thesetting item changes.The following setting items can beswitched based on the speaker layoutsettings (see page 61):When 4 speaker layout is selected:CS II ↔ PEQ ↔ Time Alignment ↔X-Over ↔ Harmonizer ↔ NF Setting ↔Sound Data ↔ SP Layout ↔ CustomMode ↔ CSII When 3 way speaker layout isselected:PEQ ↔ Time Alignment ↔ X-Over ↔Harmonizer ↔ NF Setting ↔ SoundData ↔ SP Layout ↔ Custom Mode ↔PEQ ↔ Switches among the adjustmentmodes.ATTENTIONIf returning to previous screen, press the [RTN]button.Circle Surround II (CSII) settingCSII and TruBass (ON/OFF) settings can beperformed.The CSII setting mode is activated.Press the [SELECT] (Upper/ Lower)button to set CSII modes as follows:Low ↔ Hi ↔ OFF ↔ Low When CSII is HI or Low, TruBass canbe turned ON/OFF.Right: TruBass ONLeft: TruBass OFFThe TruBass display will appearshaded when TruBass is set to OFF.The selected settings will take effect.Parametric equalizeradjustment (PEQ)When the 4-speaker layout is selected, 7-bandparametric equalizers can be adjusted.When the 3 way speaker layout is selected, 11-band parametric equalizers can be adjusted forboth the Hi range, Mid range and Low range.(For details, about speaker layout setting, refer to"Speaker layout settings (SP Layout)" on page61.)Each band can be set to the following medianfrequencies:1 Press the [CUSTOM/MENU] buttonfor more than one second.2 Press the [SELECT] (Upper/Lower)button to select the SOUND.3 Press the [ENTER] button.4 Press the [SELECT] (Upper/Lower)button to select the setting item.5 Press the [ENTER] button.1 Press the [SELECT] (Upper/Lower)button to select the CSII.2 Press the [ENTER] button.3 Press the [SELECT] (Upper/Lower)button.4 Press the [SELECT] (Right/Left)button.5 Press the [CUSTOM/MENU] or[RTN] button to exit soundadjustment mode.
