72Various SettingsSetting spectrum analyzersensitivity (S/A Sensitivity)The sensitivity of the spectrum analyzer displaycan be changed.The spectrum analyzer sensitivitysetting mode is activated.When the button is pressed, thespectrum analyzer sensitivity changesin the following order.Hi ↔ Mid ↔ Low ↔ Hi ↔ The selected settings will take effect.Setting the steering remotefunction (U.S.A. only)The vehicle’s factory loaded steering remotebecomes inoperable when the CD7100 isinstalled. The ECLIPSE web site (E-iSERV)provides software that enables steering remoteoperation even with the installation of the mainunit. Import this software into your CD7100.For details, contact the store from which youpurchased your main unit. Depending on yourvehicle’s make and model, material downloadedfrom the web site may not be compatible withyour steering remote. Consult the store fromwhich you purchased your CD7100 aboutcompatibility and set-up procedures. Software forthe steering remote can be downloaded andimported into the main unit as follows:Reading steering remote data(U.S.A. only)The steering remote data that has beendownloaded from E-iSERV (web site) to a USBmemory or CD-R can be loaded into the mainunit and save there.The steering remote setting mode isactivated.When using a CD-R:“INSERT DISC” will be displayed andthe front panel will open automatically.When using a USB memory:"CONNECT USB" is displayed until aUSB memory is connected.1 Press the [SELECT] (Upper/ Lower)button to select the S/A Sensitivity.2 Press the [ENTER] button.3 Press the [SELECT] (Upper/ Lower)button to select the spectrumanalyzer sensitivity.4 Press the [ENTER] button.5 Press the [CUSTOM/MENU] or[RTN] button to exit function mode. 1 Press the [SELECT] (Upper/Lower)button to select the Steering SWData.2 Press the [ENTER] button.3 Press the [SELECT] (Upper/Lower)button to select media types.4 Press the [ENTER] button.Access The ECLIPSE web site.(URL: http://www.e-iserv.jp)Download the steering remote software followinginstructions provided on the ECLIPSE web site (E-iSERV). (Because material available on the websitemay not be compatible with the steering remotesfound on some automobiles, make sure to checkthe website for details about compatibility.)Copy the downloaded software to CD-R or a USBmemory.Import into the main unit.The steering remote can be operated.
