Making changes with Display Adjustment Mode65XIIChanging spectrum analyzer(S/A)You can change the spectrum analyzer type.The spectrum analyzer type settingmode is activated.When the button is pressed, theanalyzer type changes in the followingorder.Type 1 ↔ Type 2The selected settings will take effect.Changing Slide Show ON/OFF(Slideshow)Slide Show can be switched ON or OFF. WhenSlide Show is switched ON and "Slide Show" isselected in the screen settings, the main unit willdisplay a series of previously-stored images (seepage 19).The slide show setting mode isactivated.When the button is pressed, the slideshow setting changes in the followingorder.Upper: ONLower: OFFGPS information displayThe following GPS information can be displayedin addition to map information when an optionalGPS unit is connected:• Directional heading• GPS reception• Latitude/longitude• Compass• Speed indicator displayThe GPS information setting mode isactivated.The following information is displayeddepending on the display typeselected:OFF: No displayType A: Directional heading, GPSreception, compassType B: Latitude/longitude, GPSreception, compassType C: Speed indicator, GPSreception, compassThe selected settings will take effect.1 Press the [SELECT] (Upper/Lower)button to select the S/A.2 Press the [ENTER] button.3 Press the [SELECT] (Upper/Lower)button to select the setting item.4 Press the [ENTER] button.5 Press the [CUSTOM/MENU] or[RTN] button to exit displayadjustment mode.1 Press the [SELECT] (Upper/Lower)button to select the Slideshow.2 Press the [ENTER] button.3 Press the [SELECT] (Upper/Lower)button to select the setting item.4 Press the [CUSTOM/MENU] or[RTN] button to exit displayadjustment mode.1 Press the [SELECT] (Upper/Lower)button to select GPS INFO thenpress the [ENTER] button.2 Press the [SELECT] (Upper/Lower)button to OFF, Type A, Type B orType C.3 Press the [ENTER] button.4 Press the [CUSTOM/MENU] or[RTN] button to exit displayadjustment mode.
