How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A./CANADA only)83XVIIDirect channel selectionThe channel can be selected by inputting thechannel directly.The mode will change to directchannel selection mode.Right: Advance to next digit.Left: Return to previous digit.When the button is pressed, the mediatype changes in the following order.0 ↔ 1 ↔ 2 ↔ 3 ↔ 4 ↔ 5 ↔ 6 ↔ 7 ↔8 ↔ 9 ↔ 0 ↔ Starts reception.Manually setting channels intomemoryThis section covers the setting of channels inmemory under the numbered buttons.The tuned channel is now memorizedand set in the button selected. Repeatthe procedure to set additionalmanually tuned channels in memory,in turn, for buttons [1] to [6]. Thesebuttons are called the preset buttons.ATTENTIONIf the vehicle’s battery is disconnected (forrepairs to the vehicle or for removing the mainunit), all channels in memory will be lost. Insuch a case, set channels in memory again.Preset channel scanThis function enables reception of all thechannels in the preset buttons for five secondseach.[P SCAN] will appear at the display,and channels stored under presetbuttons [1] through [6] will be playedfor five seconds each.The main unit will stay tuned to thedesired channel.Switching displays when usingthe SIRIUS satellite radioEach time the button is pressed thedisplay item changes in the followingorder:channel name → category name → title→ artist → channel name → ATTENTIONIf there is no name, NO_ DATA will appear.1 Press the [MODE] button for morethan one second.2 Press the [SELECT] (Right/Left)button to select the channel digitnumber.3 Press the [SELECT] (Upper/Lower)button to select the channelnumber to be input.4 Press the [ENTER] button.1 Press the [SELECT] (Right/Left)button to tune to the channel to beentered in memory.2 Select any button, from [1] to [6],and press it for more than twoseconds.1 Press the [SELECT] (Lower) buttonfor more than one second.2 To stop the preset scan mode at adesired channel, press the[SELECT] (Lower) button again.1 Press the [SCREEN] button formore than one second.
