www.fanox.com Rev. 07 125/1387.7.18. PGC and Outputs Configuration MenuTo assign an instantaneous state to a physical output, browse through the STATE menu to find the desired instantaneous state. When the state appears,press ► to enter the output configuration menu. Use the “▲” and “▼” keys in this menu to find the desired physical output. Then it is necessary to assignthe logical gate. To do it, it is necessary to press ◄. Finally, it is necessary to confirm the choice by pressing “OK”. After, the confirmation is displayed on thescreen; the index of 1 to 4 associated to the instantaneous state within the physical output configuration is displayed. Go up through the menu levels bypressing the “C” key.↑Sta. 50-1↓ C SIAB110FD132AC0.00 0.00 0.00 0.00OK Phase A Pickupnot activated C ↑Sta. 50-1↓▲▼ Phase B Pickupnot activated ► Set Password-> 0C Phase B Pickupnot activated◄▼▲► Set Password-> 5555OK Phase B Pickup>?0Output 1 y/n? C ↑Sta. 50-1↓
