FANOX SIA-B Series User Manual

Contents

FANOX SIA-B Series User Manual Manual pdf 82 page image

www.fanox.com Rev. 07 82/1387.7. MENUS7.7.1. Standby mode screenThe default screen shows the device model and the currents in phase A, phase B, phase C, andNeutral. Press “OK” to select a menu: measurements, states, settings, and events. If the HMI is leftin any state, it will return to the default screen after 5 minutes without any key being pressed.SIAB110FD132AC0.00 0.00 0.00 0.00C IA IB IC IN0.00 0.00 0.00 0.00C Free text0.00 0.00 0.00 0.00C SIAB110FD132AC0.00 0.00 0.00 0.00If any error is detected by the self-diagnosis, an error message appears in the second line (insteadof the currents) on the main screen, which can show any of the following information: (see insideself-diagnosis section).• NO TRIP POWER• MEASUREMENT ERROR• EVENTS ERROR• EEPROM ERROR• DATE & TIME ERROR7.7.2. Accessing the menusThe keys ▲, ▼, ◄ and ► are used to navigate through the different options and menus. The “OK”key is used to accept and to enter and menu or an option. The “C” key is used to move up throughthe menu levels.It is not necessary to enter any password to read or view the parameters, measurements orsettings…A 4-character password must be entered in order to modify any parameter.After returning to the main screen, the password must be entered again to make any furthermodifications.The keys ◄ and ► are used to navigate from one item to another within a parameter. The keys ▲and ▼ are used to increase or decrease the value. If an invalid value is entered during the process,the “C” key can be used to delete it.The navigation through the menus is described as graphically as possible below.