B. Installing theWindows 3.1Printer Driver33PrimeraPro can be used with virtually anyMicrosoft Windows 3.1 (or higher) softwareapplication program. If your application programallows printing, it will more than likely becompatible with PrimeraPro. Before printing, youmust tell the application that you’re using aPrimeraPro. This is accomplished the first time youuse the printer by installing in Windows what iscalled a “printer driver.” The printer driver issimply a diskette with software on it that givesPrimeraPro the proper commands it needs in orderto print. After you’ve installed the driver, put thedriver diskette away in a safe place for possiblefuture use. It is very important to save the originalprinter driver diskette which ships with yourprinter. This printer driver diskette includesspecial print information which is unique to yourspecific printer and which may be called for whenupdating printer drivers.NOTE This section of the PrimeraPro Operator’s Manualassumes that you are already familiar with Windowsand know how to move around within Program Groups,how to use a mouse, and so on. If you are not yetfamiliar with Windows, consult the appropriateMicrosoft documentation to become familiar with thebasics of Windows before proceeding.Use the following procedure to install PrimeraPro’sWindows printer driver:1. After startingWindows, go to theMain program groupand select ControlPanel.2. From the ControlPanel, select Printers.
